• Warman 20x18 Slurry Pump
  • 20x18 Slurry Pump from China
  • China Warman 20x18 Slurry Pumps
  • China 20x18 Slurry Pump

    20x18TU-AH Slurry Pump

    Size: 20" x 18"
    Capacity: 2520-5400m3/h
    Head: 13-57m
    Speed: 200-400rpm
    NPSHr: 5-10m
    Eff.: 85%
    Power: Max.1200kw
    Handling solids: 140mm
    Seal arrangement: Packing seal, Expeller seal, Mechanical seal
    +86 180 3203 4573

    20x18TU-AH Slurry Pump is the world’s most comprehensive centrifugal slurry pumps for use in mining, chemical and industrial applications. The 20x18 slurry pumps are designed for ultra heavy duty applications such as mill discharge, process plant and tailings, high pressure pipelines, as well as other specialty applications.

    Design Features:

    √ Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
    √ Ductile iron fully lined casing provides durability, strength, safety, and long service life.
    √ Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
    √ Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs.
    √ Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life.
    √ Minimal shaft/impeller overhang reduces shaft deflection and increases packing life.
    √ Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and    prolonged bearing life.
    √ Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime.
    √ Optional dry running shaft seal reduces or eliminates flush water requirements
    √ Effective expeller prolongs packing life while reducing or eliminating flush water requirement.
    √ Interchangeability of seal arrangements – full flush, low flow, centrifugal, or mechanical seals may be fitted to any sized pump.

    Tobee® 20/18 TU AH Slurry Pump Performance Parameters:


    Max. Power



    Clear Water Performance


    Vane No.



    Capacity Q


    Head H


    Speed n


    Eff. η














    20/18 TU AH Slurry Pump Installation Types:


    DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.

    CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the

    motor support frame which is located on the bearing support above the slurry pump.

    ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.

    CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors

    Tobee® 20/18 TU AH Slurry Pumps Applications:

    √ Mill Discharge

    √ Cyclone Feed

    √ Tailings Transport

    √ Concentrator Process Pumps

    √ Mine Dewatering

    √ Iron & Steel ·Cement

    √ Sand & Gravel ·Mineral Sands

    √ Chemical Slurry ·Sugar and Raw Foodstuffs

    √ Mining Industry (Coal, Diamond, Aluminium, Gold,

    √ Platinum, Phosphate, Copper, Zinc, Iron Ore


    * Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names, numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

    * Tobee® 20/18 TU AH slurry pumps and spares are only interchangeable with Warman® 20/18 TU AH slurry pumps and spares.

    * This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.