Brand: Tobee® Capacity: 720-2865 m3/h Head: 11.6-51.1 m PH: 2~4 Materials: Hyper chrome alloy or Rubber etc.
Finding a robust, reliable solution for the demanding FGD Gypsum Slurry Pump needs in your power plant or chemical facility? Look no further than the Tobee® 350DT. Engineered specifically as a high efficiency gypsum slurry circulation pump, this horizontal centrifugal powerhouse excels in the critical task of slurry transfer within desulfurization systems. It's the ultimate wear resistant pump for FGD applications, built to conquer the harsh realities of circulating abrasive limestone slurries and corrosive gypsum byproducts in wet scrubbers, ensuring smooth flue gas desulfurization and effective environmental compliance. Trust the 350DT for dependable transfer and circulation where it matters most.
The Tobee® 350DT is not your average pump. It's a heavy duty slurry pump for flue gas desulfurization, designed from the ground up to handle the exceptionally abrasive nature of limestone and gypsum slurries, combined with the corrosive, low-pH conditions prevalent in wet FGD scrubbers. Its wetted components are meticulously crafted from premium high-chrome alloys or specialized elastomers, delivering unmatched corrosion resistant slurry pump for wet scrubbers performance. This ensures extended service life, minimized downtime for replacements, and significantly lower total cost of ownership compared to lesser pumps.
Beyond brute strength, the 350DT prioritizes operational excellence. Its advanced hydraulic design maximizes hydraulic efficiency, translating to lower energy consumption for the demanding task of gypsum slurry transfer pump for desulfurization. Key features enhancing reliability include:
• Robust Bearing Assembly: Oversized bearings and robust housings are engineered to handle heavy radial and axial loads inherent in slurry pumping, ensuring smooth, vibration-free operation.
• Advanced Sealing Solutions: Options include specialized expeller seals or high-performance gland packing configurations, effectively preventing slurry ingress and protecting critical components.
• Back Pull-Out Design: Facilitates swift and easy maintenance. Access the impeller, wear plates, and mechanical seal without disturbing the pump casing or pipeline connections – a major advantage for minimizing plant downtime.
• Impeller Adjustment: Allows fine-tuning of the impeller's axial position within the casing to compensate for wear over time, maintaining peak pump efficiency throughout its operational life.
|
Model |
Capacity Q (m³/h) |
Head H (m) |
Speed n (r/min) |
Max. particles (mm) |
Max. power P (kw) |
Weight (kg) |
|
350DT-78 |
720-2865 |
11.6-51.1 |
400-740 |
104 |
500 |
3700 |
The Tobee® 350DT FGD Gypsum Slurry Pump is the workhorse for critical desulfurization tasks:
• Primary Circulation Pump: Circulating limestone slurry within the absorber tower/reactor vessel to ensure optimal contact with flue gas for efficient SO2 removal.
• Gypsum Slurry Transfer: Reliably pumping the reacted gypsum slurry (a mix of gypsum crystals and process water) from reaction tanks to hydrocyclones, dewatering equipment (like vacuum belt filters), or storage.
• Chemical Process Transfer: Its robust, corrosion resistant construction makes it equally suitable for handling other challenging slurries within chemical processing plants, particularly where abrasive or corrosive media are present during cleaning or production stages.
• Recycle & Feed Streams: Handling various process streams within the complex FGD circuit.
• Proven Durability: Exceptional wear resistant materials combat abrasion, extending component life.
• Superior Corrosion Resistance: Engineered for low-pH environments, ensuring longevity against chemical attack.
• Optimized Efficiency: Hydraulic design minimizes energy costs for high efficiency gypsum slurry circulation.
• Reduced Maintenance Costs: Back pull-out design and adjustable impeller simplify upkeep and optimize performance over time.
• Reliability You Can Count On: Built for continuous, trouble-free operation in the most critical applications.
FAQ:
Q: Is the Tobee® 350DT specifically designed for gypsum slurry?
A: Absolutely. While highly effective for limestone slurry circulation, the 350DT is expertly engineered to handle the unique challenges of abrasive gypsum slurry transfer within FGD systems and chemical processes, featuring superior wear and corrosion resistance.
Q: What makes this pump suitable for low-pH FGD environments?
A: The corrosion resistant slurry pump for wet scrubbers utilizes carefully selected high-chrome alloys (like A49) or specialized elastomeric linings in its wetted parts, specifically chosen to withstand the corrosive conditions where pH often drops below 4.
Q: How does the back pull-out design benefit maintenance?
A: This critical feature allows maintenance personnel to access and service the impeller, shaft sleeve, and mechanical seal by simply removing the back cover and pulling the rotating assembly rearward. There's no need to disconnect the suction or discharge piping, drastically reducing downtime and labor costs.
Don't let abrasive gypsum slurry or corrosive FGD conditions compromise your plant's uptime and efficiency. The Tobee® 350DT FGD Gypsum Slurry Pump for Power Plants delivers the wear resistant, corrosion resistant, and high efficiency solution you demand for reliable slurry transfer pump for desulfurization and limestone gypsum process circulation.
Optimize your flue gas desulfurization system with proven reliability. Contact Tobee® today for detailed 350DT specifications and a competitive quote tailored to your power plant or chemical application needs!
Sara Liang
+86 189 3110 6396 (Whatsapp/Wechat)
Inquiry@tobeepump.com
HEBEI TOBEE PUMP CO., LIMITED
Tel: +86 180 3203 4573
Fax: +86 311 8722 1317
E-mail: Sales@tobeepump.com
Skype: Tobee.Pump
Add: No. 266, Tianshan St, High-tech Zone, Shijiazhuang City 050000, China.
