• 18x16TU GH High Head Gravel Pump

    18x16TU-GH High Head Gravel Pump

    SPECIFICATIONS:
    Size: 18" x 16"
    Capacity: 720-5040m3/h
    Head: 18-80m
    Speed: 250-500rpm
    NPSHr: 3-9m
    Power: Max.1200kw
    Handling solids: 254mm
    Materials: High chrome alloy
    Share
    +86 180 3203 4573
    Description

    18x16TU-GH High Head Gravel pump is designed for continuously handling for large particles of slurries, sands, gravels, stones with high head applications, The main wear parts made from high chrome alloy, The hardness can upto 65HRC, Working life is 30% increasing than other common slurry pumps, 18x16 dredge gravel pump widely used for cutter suction dredges, sand dredgers, sand Excavation, sand reclamation, sand barge loading etc.


    Design  Features:

    √ 18x16 dredge gravel pumps are designed for gravel and sand dredge from river and/or sea, as well as large particle pass in mining operations.
    √ The unique segmented clamp ring on larger size units and solid on smaller pumps,facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
    √ Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
    √ Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
    √ The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design. 
    √ heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
    √ A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all slurry pumps.


    18x16TU-GH High Head Gravel pump Structural Drawing:


    Warman 18x16 Gravel pump Drawing


    Note:

    * Tobee®  is a registered trademark and does not represent or is not in any way affiliated with Warman®  of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

    * Tobee®  18x16 TU-GH high head gravel pumps and spares are only interchangeable with Warman®  18x16 TU-GH high head gravel pumps and spares.

    * This document is the property of Tobee®  Pump and can be neither reproduced nor disclosed to a third party without a written authorization.



    Related Products