• 12/10F-M Slurry Pump
  • 12/10E-M Slurry Pump
  • Warman 12/10 FM Slurry Pump
  • 12/10 EM Slurry Pump
  • 12x10F-M Warman Pump

    12/10F-M Slurry Pump

    SPECIFICATIONS:
    Size: 12" x 10"
    Capacity: 720-1980 m3/h
    Head: 7-68 m
    Speed: 300-800rpm
    NPSHr: 4-10m
    Eff.: 73%
    Power: Max.260kw
    Handling solids: 65mm
    Materials: High chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.
    Share
    +86 180 3203 4573
    Description

    12/10F-M Slurry Pump is a proven horizontal end suction centrifugal slurry pump that will reliably and economically handle abrasive and corrosive medium duty services, The 12/10F-M medium slurry pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistant metal casting liners and Impellers, which are all interchangeable within a common casting assembly.


    Design Features:

    √ Wear is reduced and maintenance simplified by the use of a one-piece volute liner with no radial split at the cutwater
    √ Front and back liners are adjustable while the pump is running to maintain efficiency and minimize wear; also reduces expeller clearance maintaining shaft seal performance
    √ Internal liners can be fully worn as the cast iron split outer casing provides structural integrity and high operating pressure capability
    √ Safe closed valve operation is assured by the pressure relief device fitted as standard on all models
    √ An easily removable hardened steel or ceramic coated steel shaft sleeve with o-ring seals at both ends protects the shaft from abrasive or corrosive contaminants
    √ Reduced and simplified inventory is assured with a minimum number of wearing parts
    √ Reduced seal pressure and internal recirculation is achieved by the pressure molded deep sealing vanes on the front and back of the impellers
    √ Extended bearing life is assisted by large diameter flingers and static seals to prevent ingress of liquids while operating and while stopped
    √ Grease relief holes prevent bearing overheating due to over greasing
    √ The best material for each application can be chosen from the wide range of erosion and corrosion resistant materials, enabling wear life optimization of each component


    Note:

    * Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names, numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

    * Tobee® 12/10F-M slurry pumps and spares are only interchangeable with Warman® 12/10F-M slurry pumps and spares.

    * This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.

    Related Products