10X8E-M Rubber Lined Slurry Pump headed to India
Oct 13, 2021

Tobee® one unit bare shaft 10x8 EM slurry pump with rubber wear parts will used in delivery the phosphoric acid, phosphate matrix, process chemical. It will be delivered to India to start work.

 

10/8 E M Rubber Medium Duty Slurry Pump Performance Parameters:


Model

Max. Power

(kw)

Materials

Clear Water Performance

Impeller

Vane No.

Liner

Impeller

Capacity Q

( m3/h)

Head H

( m)

Speed n

(rpm)

Eff. η

(%)

NPSH

(m)

10/8E-M

300

RU

RU

540~1188

10~42

500~900

79

5~9

5


The spare parts are very easily worn-out components because the wear parts work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump wear parts, the material plays an important role here. So Tobee has many options to meet your applications, as following:


Slurry Pump Wear Parts Material Options:

 

Metal Slurry Pump Wear Parts Material:

  • KmTBCr27 is named in China, which has 27% Chrome. Alloy KmTBCr27 is a wear resistant white iron that offers excellent performance under erosive conditions.
  • KmTBCr28 has the main elements of Chrome 28%, low Carbon with hardness of 430 in Brinell. KmTBCr28 is a corrosion resistant white iron suitable for low pH corrosion duties, where erosive wear is also a problem.
  • KmTBCr35 has the main elements of Chrome 35-45%, low Carbon with hardness of 450 in Brinell. KmTBCr35 is a premium erosion/corrosion alloy to be used where excellent erosion and corrosion resistance is required.

Rubber Slurry Pump Wear Parts Material:

  • PU26 is used for impellers where superior erosive resistance is required in fine particle slurries. The hardness of ER01 makes it more resistant to both chunking wear and dilation (ie, expansion caused by centrifugal forces) as compared to RU55. Ru26 is generally only used for impellers.
  • RU55 has antioxidants and antidegradants, It has been optimized to improve storage life and reduce degradation during use. The high erosion resistance of RU55 is provided by the combination of its high resilience, high tensile strength and low short hardness.

Polyurethane Slurry Pump Wear Parts Material:

  • PU38 is an erosion resistant material that performs well in elastomer applications where "tramp" is a problem. This is attributed to the high tear and tensile strength of PU01. However, its general erosion resistance is inferior to that of natural rubber.

Ceramic Slurry Pump Wear Parts Material:

  • T-SiC Slurry Pump Ceramic Parts is a kind of inorganic nonmetallic materials.Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride.

Customized Materials:

  • Excellence is always making continuous optimization of materials like EPDM, Hapalon, Hastelloy, CD4MCu and other anti-abrasive materials for various applications.


10X8E-M Slurry Pump Reference Photos:

Warman 10/8E-M Horizontal Slurry Pump

China 10x8 EM Bare Shaft Slurry Pumps

Rubber Lined Slurry Pump 10x8E-M

10x8 inch Mining Slurry Pump with rubber parts

China 10/8E-M Ash Slurry Pump Supplier


10/8E-M Slurry Pump Video:



Technical dept.
Hebei Tobee Pump Co.,Limited