Slurry Pump XLM Bearing Assembly
May 11, 2022
Tobee® can manufacture the XLM type pump bearing assembly, it including: B005XLM, C005XLM, CAM005XLM, D005XLM, DAM005XLM, DDAM005XLM, EE005XLM, R005XLM, FAM005XLM, etc. The difference between the XLM bearing assembly and the standard bearing assembly is that the shaft. The pump shaft diameter is different with the standard.

Slurry Pump Bearing Assembly also called rotor assembly is the main pump parts of drive end which transmit power to impeller, which is an important parts of the slurry pump and is the transmission power device, slurry pump bearing assembly has a large diameter shaft with a short overhang minimizes deflection and vibration to long bearing life,only four through bolts are required to hold the cartridge type housing in the slurry pump frame.

The slurry pump bearing assembly is used to connect the slurry pump and motor parts to form a complete working system. The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump. Before assembling, pre-heat the inner race of the bearing to a temperature below 120℃. The inner race must be fixed next to the shaft shoulder or grease retainer. For double row taper roller bearing, the inner ring, outer ring, and lantern ring come in a set, please do not interchange the components.

For R, S, T, TU, U type pump bearing assembly, the pump uses double row roller bearings on the sides of the shaft. The bearing itself has guaranteed axial space and no further adjustment is required. When assembling the bearing, an appropriate amount of lubricant should be added. The end of the sealing cap adopts a labyrinth ring and a labyrinth.

When assembling the bearing, an appropriate amount of lubricant should be added. End cap seals are labyrinth and piston rings. Please arrange the gaps on the labyrinth rings so that they are not at the same angular position.


XLM Bearing Assembly of Slurry Pump Photos:

Warman Slurry Pump XLM Bearing Assembly

005XLM Pump Bearing Assembly

DDAM005XLM Bearing Assembly for 6/4 AH Slurry Pump

6X4DD-AH Pump Parts Bearing Assembly DAM005XLM

EE005XLM Pump Parts Bearing Assembly

Slurry Pump Shaft 073XLM


Technical dept.

Hebei Tobee Pump Co.,Limited