• Wamran Pump Polyurethane Parts
  • Warman Polyurethane Parts China
  • Warman U38 Polyurethane Parts
  • Warman Slurry Pump Polyurethane Impellers
  • Polyurethane parts for Warman Pumps

    Polyurethane Slurry Pump Parts

    Impellers: 1.5/1B-AH~16/14TU-AH
    Cover plate liners: 1.5/1B-AH~16/14TU-AH
    Frame plate liners: 1.5/1B-AH~16/14TU-AH
    Throatbush: 6/4D-AH~16/14TU-AH
    FPL insert: 14/12ST-AH~16/14TU-AH
    Materials: U01, U38 Polyurethane (PU)
    +86 180 3203 4573

    Tobee® Slurry Pump Polyurethane Parts are directly connection with slurries, It is very crucial to the service life of slurry pumps. The worklife of Polyurethane parts is longer than Rubber materials for 3~5 times, Polyurethane wetted parts include Impeller, Throatbush, Frame plate liner, Cover plate liner, Frame plate liner insert etc. They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries. For the long service life of pump parts, Polyurethane material plays an important role here.

    Features & advantages:

     Wide range of hardness - With the high hardness, The Polyurethane parts still have the good elongation and elasticity, The hardness of Polyurethane parts is at Shore A10-D80.

     High wear resisting - Anti-resistant performance is from 0.01-0.10(cm3)/1.61km, Duration will be longer 3-5 times than rubber.

     High strength - Break strength and bearing capacity is higher than rubber.

     Oil resistance: As a kind of high molecular compound, it is almost incorruptible.

     Radiation resistance: Polyurethane parts have high radiation resistance, It still have good performance at 10-10Gy radiation dose.

     Good Vibration absorption

     Low temperature resistance

     High acid and alkali resistance

    Compared with Metal

    Compared with Plastic

    Compared with Rubber


    High impact resistance

    High Anti-abrasion


    Elastic memory

    High shear & tear resistance



    Excellent bearing capacity

    Lower cost


    Thick section molding


    Variable friction coefficient





    Impact resistance

    Thick section molding



    Lower mould cost

    Oil resistance

    Easily molding

    Better cold tolerance

    Radio resistance


    Cold flow resistance

    Wide hardness range


    Radio resistance


    Lower price

    Long worklife

    Lower mould cost

    Tobee® Slurry Pump Polyurethane Parts Structural Drawing:

    Warman Slurry Pump Polyurethane Parts Drawing

    Tobee® Polyurethane Slurry Pump Parts are widely used for 1.5/1B-AH Slurry Pump, 2/1.5B-AH Slurry Pump, 3/2C-AH Slurry Pump, 4/3D-AH Slurry Pump, 6/4E-AH Slurry Pump, 8/6E-AH Slurry Pump, 10/8ST-AH Slurry Pump, 12/10ST-AH Slurry Pump, 14/12ST-AH Slurry Pump, 16/14TU-AH Slurry Pump, 300S-L Slurry Pump, 350S-L Slurry Pump, 400ST-L Slurry Pump etc.

    * Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

    * Tobee® slurry pump polyurethane parts and spares are only interchangeable with Warman®  slurry pump polyurethane parts and spares.

    * This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.