Base: U-steel Bearing: ZWZ, SKF, NSK, TIMKEN Shaft: 40CrMo, SS316L Mechanical seal: Burgmann Packing seal: Asbestos fibers+mica, PTFE Casing: HT250, QT500, Stanless Steel, Chrome alloy etc Wetted parts: Rubber, High chrome, Polyurethane, Ceramic etc
Tobee® Rubber Lined Slurry Pump Parts namely the rubber parts have direct connection with slurries, They are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed, The wetted parts include impeller, cover plate liner, frame plate liner, throatbush, frame plate liner insert etc, These wear parts are very crucial to the service life of slurry pumps, For the long service life of pump parts, the material plays an important role here, Tobee offers rubber slurry pump parts are more suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Tobee® Slurry Pump Rubber Wear Parts:
√ Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
√ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
√ Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Tobee® Rubber Materials Type And Data Descriptions:
Tobee code
Material name
Type
Description
RU08
Standard Impeller
Rubber
Natural Rubber
RU08 is a black natural rubber, of low to medium hardness. R08 is used
for impellers where superior erosive resistance is required in fine particle
slurries. The hardness of RU08 makes it more resistant to both chunking wear
and dilation (i.e.: expansion caused by centrifugal forces) as compared to
RU26. RU08 is generally only used for impellers.
RU26
Anti Thermal
Breakdown Rubber
Natural Rubber
RU26 is a black, soft natural rubber. It has superior erosion resistance
to all other materials in fine particle slurry applications. The antioxidants
and antidegradents used in RU26 have been optimized to improve storage life
and reduce degradation during use. The high erosion resistance of RU26 is
provided by the combination of its high resilience, high tensile strength and
low Shore hardness.
RU33
Natural Rubber
(Soft)
Natural Rubber
RU33 is a premium grade black natural rubber of low hardness and is used
for cyclone and pump liners and impellers where its superior physical
properties give increased cut resistance to hard, sharp slurries.
RU55
Anti Thermal
Natural Rubber
Natural Rubber
RU55 is a black, Anti-corrosive natural rubber. It has superior erosion
resistance to all other materials in fine particle slurry applications.
SY01
EPDM Rubber
Synthetic Elastomer
SY12
Nitrile Rubber
Synthetic Elastomer
Elastomer SY12 is a synthetic rubber which is generally used in
applications involving fats, oils and waxes. S12 has moderate erosion
resistance.
SY31
Chlorosulfonated
Polyethylene (Hypalon)
Synthetic Elastomer
SY31 is an oxidation and heat resistant elastomer. It has a good balance
of chemical resistance to both acids and hydrocarbons.
SY42
Polychloroprene (Neoprene)
Synthetic Elastomer
Polychloroprene (Neoprene) is a high strength synthetic elastomer with
dynamic properties only slightly inferior to natural rubber. It is less
effected by temperature than natural rubber, and has excellent weathering and
ozone resistance. It also exhibits excellent oil resistance.
SY45
High Temperature
Hydrocarbon Resistant Rubber
Synthetic Elastomer
SY45 is an erosion resistant synthetic rubber with excellent chemical
resistance to hydrocarbons at elevated temperatures.
SY51
Fluoroelastomer
(Viton)
Synthetic Elastomer
SN51 has exceptional resistance to oils and chemicals at elevated
temperatures. Limited
erosion resistance
Tobee® Slurry Pump Rubber Parts Applications:
Tobee Slurry Pump Rubber Parts are widely used for AH/HH/L/M Horizontal slurry pumps, SPR Vertical rubber lined slurry pumps, Centrifugal horizontal slurry pumps, Warman rubber lined slurry pumps, Chemical slurry pumps, Silica sand slurry pumps, Minerals processing slurry pumps, De-Watering Screen Pump, Ore sand pumps, Tailings Pump, Pipe-jacking slurry pumps, Ball mill discharge Pump, Tunnelling slurry pumps, Mixing tank slurry Pump, Wet crushers slurry pumps, SAG mill discharge pumps, Ball mill discharge pumps, Rod mill discharge slurry pumps, Ni acid slurry pumps, Coarse sand pumps, Coarse tailings pumps, Phosphate matrix slurry pumps, Scrubber slurry Pump, Minerals concentrate pumps, Heavy media slurry pumps, Dredging Sand slurry pumps, Bottom ash slurry pumps, Fly ash pumps, Lime grinding pumps, Screen feed Pump, Oil sands pumps, Mineral Sands pumps, Fine tailings pumps, Tailings booster Pump, Thickner Tailings Pump, Process recycle Pump, Pipeline transfer pumps, Phosphoric acid slurry pumps, Coal slurry pumps, Flotation pumps.
* Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.
* Tobee® slurry pumps rubber parts and spares are only interchangeable with Warman® slurry pumps rubber parts and spares.
* This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.
HEBEI TOBEE PUMP CO., LIMITED
Tel: +86 180 3203 4573
Fax: +86 311 8722 1317
E-mail: Sales@tobeepump.com
Skype: Tobee.Pump
Add: No. 266, Tianshan St, High-tech Zone, Shijiazhuang City 050000, China.
