• Warman 300TV-SP Vertical Slurry Pump

    300TV-SP Vertical Slurry Pump

    SPECIFICATIONS:
    Size: 300mm
    Capacity: 288-1267m3/h
    Head: 6-33m
    Max.power: 200kw
    Handing solids: 65mm
    Speed:350-700rpm
    Submerged length:1800-3600mm
    Materials:High chrome alloy, Rubber, Polyurethane etc
    Share
    +86 180 3203 4573
    Description

    300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.


    Design Features:

    • Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
    • Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
    • Large Particle - Large particle impellers are also available and enable passing unusually large solids.
    • Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
    • Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
    • Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
    • Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
    • Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.


    Tobee® 300TV SP Vertical Slurry Pumps Performance Parameters:


    Model

    Matching power P

    (kw)

    Capacity Q

    (m3/h)

    Head H

    (m)

    Speed n

    (r/min)

    Eff.η

    (%)

    Impeller dia.

    (mm)

    Max.particles

    (mm)

    Weight

    (kg)

    300TV-SP(R)

    22-200

    288-1267

    6-33

    350-700

    50

    610

    65

    3940



    Tobee® 300 TV-SP Vertical Slurry Pumps Applications:



    Tobee® 300TV-SP Sump Slurry Pumps are widely used for Mining, Mineral Processing, Sand and Gravel, Coal Prep, Chemical Slurry Service, Cyclone Feeds, Aggregate Processing, Wet crushers, SAG mill discharge, Fine Primary Mill Grinding, Tailings, Secondary Grinding, Bottom/fly ash slurries, Pulp And Paper, Food Processing, Cracking Operations, Gypsum slurries, Pipeline Transport, High Velocity Hydraulic Transport,Food Processing, Explosive Sludge In Metal Smelting, River And Pond Dredging, Heavy Refuse Removal, Larger Particle Or Low NPSHA Applications, Continuous (Snore) Sump Pump Operation, Abrasive Slurries, High Density Slurries, Large Particle Slurries, Sump Drainage, Wash down, Floor Drainage, Mixing, Iron Ore, Cooper, Diamond, Aluminum oxide, Gold, Kaolin, Phosphorite, Steel, Palm, Suger, Chemical, Power, FGD, Frac Sand Blending, Waste water, Flotation etc.


    Note:

    * Tobee®  is a registered trademark and does not represent or is not in any way affiliated with Warman®  of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

    * Tobee®  300 TV-SP vertical slurry pumps and spares are only interchangeable with Warman®  300 TV-SP vertical slurry pumps and spares.

    * This document is the property of Tobee®  Pump and can be neither reproduced nor disclosed to a third party without a written authorization.