18x16TU-G Gravel Pump

18x16TU-G Gravel Pump is designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries.

Design Features:

• The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
• Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
• Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
• The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a one piece design.
• Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
• A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all Tobee pump.

Tobee® 18x16TU-G Gravel Pump Performance Parameter:

Tobee® 18x16TU-G Gravel Pump Applications:

The gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc. Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in Mining, Explosive sludge in metal melting, Dredging in dredger and course of rivers, and other fields.

Note:

* Tobee^®  is a registered trademark and does not represent or is not in any way affiliated with Warman^®  of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.

* Tobee^®  18x16 TU-G gravel pumps and spares are only interchangeable with Warman^®  18x16 TU-G gravel pumps and spares.

* This document is the property of Tobee^®  Pump and can be neither reproduced nor disclosed to a third party without a written authorization.